How To Read Architectural Drawings
In general, architectural drawings show only building materials such as masonry frames or study. You have to consider that the brick and administrators also have a liner or hard plaster wall plaster or sheet Dryline. That means that you’ll lose about 10 mm of space. If you have a niche to lose 10 mm on each side, what is really important if you have a cabinet that seems to just fit in space-based designs. Do not be disappointed about it after the house is completed, if in doubt, ask your designer to check for you.
vertical heights must be considered. A common feature is the height of hand shower. In general, hand shower shown in the drawing at any time between 1600 mm tall and 1800 mm in height. If you have a handheld shower, it gives you more height, but I have seen some customers to change a flat jet compatible, but the grip was too low, leading to problems later. If you are long in this stage, so keep that in mind and discuss it with your designer.
Be sure to examine your floors and height as well. If you have a refrigerator that is 1.8 meters high, will have its plans for a height of 1.8 meters and its ground floor to the bottom of overhead cabinets. If you use the table height hardwood floor layer may be increased by 25 mm, which could affect your refrigerator mounted on the roof.